| Search results list | Previous search result Next search result |
D3G283AB3211
D3G283-AB32-11
EC centrifugal fan
Motor: M3G112-GA
| Technical description | |
|---|---|
| Mass | 18.7 kg |
| Size | 283 mm |
| Surface of rotor | Coated in black |
| Material of electronics housing | Die-cast aluminum |
| Material of impeller | Sheet steel, galvanised |
| Housing material | Sheet steel, galvanised |
| Motor suspension | Motor anti-vibration mounted on one side via brackets |
| Direction of rotation | Clockwise, seen on rotor |
| Type of protection | IP 54 |
| Insulation class | "B" |
| Humidity class | F4-1 |
| Max. permissible ambient motor temp. (transp./ storage) | +80 °C |
| Min. permissible ambient motor temp. (transp./storage) | -40 °C |
| Mounting position | Shaft horizontal |
| Condensate discharge holes | None |
| Operation mode | S1 |
| Motor bearing | Ball bearing |
| Technical features | - Output 10 VDC, max. 10 mA - Alarm relay - Motor current limit - PFC, active - Soft start - Control input 0-10 VDC Control interface with SELV potential safely disconnected from the mains - Over-temperature protected electronics / motor - Line undervoltage / phase failure detection |
| EMC interference immunity | Acc. to EN 61000-6-2 (industrial environment) |
| EMC harmonics | Acc. to EN 61000-3-2/3 |
| EMC interference emission | Acc. to EN 61000-6-4 (industrial environment) |
| Touch current acc. IEC 60990 (measuring network Fig. 4, TN system) | <= 3,5 mA |
| Motor protection | Thermal overload protector (TOP) wired internally |
| Cable exit | Variable |
| Protection class | I (if protective earth is connected by customer) |
| Approval | GOST |
| Search results list | Previous search result Next search result |
